Stops Rust 7772-830 Satin Protective Enamel Spray Paint 12 Oz, Putty

Rust-Oleum Satin Spray is a low-sheen satin finish for metal, wood, concrete or masonry. Use on furniture, fixtures and outdoor décor. Dries into smooth, protective enamel. It features a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying. In addition, there is an any-angle spray feature that allows you to spray in any direction, even upside-down.

Highlights:

• Color: Putty
• Size: 12 Oz.
• Indoor/Outdoor.
• Durable, corrosion-resistant.
• Nature-inspired colors.
• Low-sheen satin.
• Use on metal, wood, concrete.
• Rust inhibitive.
• Moisture & weather resistant.
• Resists fading, cracking, chipping & peeling.
• No priming on new or lightly.
• Aerosol can.

Painting Conditions:

Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Painting Application:

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-andforth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.

Dry & Recoat:

Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 2-4 hours, to handle in 5-9 hours, and fully dry in 24 hours. Recoat before 1 hour or after 48 hours.