Low Temperature Aluminum Welding Rods - Easy Melt Soldering Wire for Aluminum, Iron, and Copper - 25cm Length(2.0mm 10pcs)

Features:Product: Aluminum Welding RodsMaterial: Aluminum Melting point: about 380Diameter: 1.6mm, 2mmLength: 25cmQuantities:10pcs/20pcsPackage list:10/20pcs * aluminum welding wireApplications:For Aluminum, Iron, Copper materialFeatures:No need solder powder;Great welding effect,with low melting point;Great weldability and erosion resistance, high thermal conductivity, high electric conductivity;Widely used, mainly used for welding bicycles, locomotive compartments, chemical containers, shipbuilding, etc.;Light weight and easily carry.Usage:1. Clean and polish the physical surface.2. Heat the surface of the metal material until the temperature of wire is up to the working temperature 380 °3. The aluminum base metal is to the appropriate working temperature when repairing thin aluminum, and then use the wire friction and to form a weld.4. Use propane gas to weld small object and use industrial gas or induction heating device to heat and weld big one, you should cool it naturally after welding.Attention:1. The thicker the piece, the more difficult to heat it up, so it is important to use a reasonable heat source.2. As long as the surface temperature of the base metal reaches the operating temperature of welding wire, you can start to weld.3. When using Oxyacetylene welding, the neutral flame welding should be used, but please do not burn the wire directly.4. Applicable heat source: such as propane, oxyacetylene and so on.5. Storage: please store in a dry and ventilated place.Note:1. The surface of the base metal must be clean.2. The base metal temperature should reach to 420 degrees, including the process of welding the base metal temperature should be maintained at 420°, and the temperature can be high or low.

• Aluminum welding rods with a low melting point of approximately 380°C, perfect for easy soldering without the need for solder powder.
• Available in two diameters (1.6mm and 2mm) and lengths of 25cm, these rods are ideal for various welding applications including aluminum, iron, and copper.
• Exceptional weldability and erosion resistance ensure strong, lasting joints, making them suitable for repairing bicycles, locomotive compartments, and chemical containers.
• Lightweight and portable devise allows for easy handling and transportation, perfect for both DIY enthusiasts and professional welders.
• Simple usage instructions: clean the surface, heat to the working temperature, and use friction to create a weld, compatible with propane and oxyacetylene heat sources.